Checkmk
to checkmk.com

1. What is NagVis?

In the article on monitoring basics you saw the map of a network’s topology based on parent-child relations. NagVis is responsible for such maps. The extension enables a visualization of, for example, infrastructures, servers, ports or processes.

NagVis' mode of operation is basically very simple: Checkmk, or to be more precise Livestatus, provides back-end data such as hosts, services, host groups and service groups. These elements from your monitoring can be placed as icons on various maps. These dynamic icons can then show the current status of each of the hosts and services. More detailed additional information can be provided by tooltips. And finally, the icons and other elements are also links to the Checkmk objects that they represent. Other available elements are lines, performance displays (gadgets) and containers for external contents.

To get a better conception of what can be achieved with NagVis in Checkmk, here are three examples:

  • Geographic maps based on OpenStreetMap for managing locations.

  • Automatic topological maps from parent-child relations.

  • Maps of individual switches or server rooms to enable an overview of ports and hardware.

Provided the parent-child relations have been defined, without further action you can call up a map in Checkmk using Monitor > Overview > Parent / Child topology. Additional steps are unnecessary here.

monitoring parents

2. Setting-up NagVis

NagVis is fully-integrated in Checkmk and configured so that you can immediately begin adding elements from your monitoring to maps.

To start NagVis, first open the section with available snap-ins for the sidebar via button sidebar add snapin at the bottom of the sidebar. Here select the NagVis maps snap-in, and finally start NagVis with the button view snapin edit button.

nagvis snapin nagvis

Before you create your first map you should have a look at the main configuration in Options > General Configuration. Here can be found over 100 options for the basics, such as data formats and language settings, from the displaying of objects on maps, to the weighting of the available host and service statuses.

nagvis2 general configuration

At this point we would like to do without a comprehensive description for the use of NagVis, and especially its configuration options. NagVis itself has a very good, detailed documentation, in which also all options of the main configuration are explained. In the following we will restrict ourselves to the most essential basics for generating simple, useful maps using NagVis in Checkmk.

3. Creating maps

3.1. The various types of maps

NagVis provides a total of five different map types: regular, dynamic, automatic and interactive/non-interactive geographic maps.

  • Regular map is the standard type of map. The map can visualize any desired scenario – from switch ports, to server rooms, to complete infrastructures. The elements (icons, lines, etc.) are added individually to the maps from the inventories of the Checkmk hosts and services.

  • Dynamic map largely resembles the regular map, with a significant difference however: hosts, services, host groups and service groups are not explicitly specified, but instead by using filters in the form of regular expressions; to put it more accurately, in the form of valid Livestatus filters. In this way new hosts and services, and likewise any alterations land automatically on the map without additional manual action being required.

  • Automap you have already met. This is the network topology map mentioned at the start of this article which is generated fully-automatically from the parent-child relations defined in Checkmk.

  • Geographical map is a map rendered with map material from the OpenStreetMap (OSM) project for their backgrounds.

3.2. Creating an automap

The quickest facility for creating a representative map is the automap. Create a new map of the Automap based on parent/child relations type via Options > Manage Maps > Create Map. In ID enter the internal name myautomap, and in Alias your name My Automap for the display.

nagvis2 automap create

The map itself will immediately appear in the content area, and its corresponding link will appear in the NagVis maps snap-in. Automap-specific settings can next be customized in Edit Map > Map Options > Automap. The render_mode entry is particularly interesting as it provides the fundamental layout of the nodes on the map.

nagvis2 automap options

In addition the root of the map can be specified here – although that is simpler to achieve with a right-click on an icon on the map, and then selecting the Make root context menu entry.

nagvis2 automap contextmenu

3.3. Creating a regular map

Regular maps are the commonest maps in NagVis. So that you can to get to know NagVis' procedures and its most important elements, we will show you how to create a small map of a server rack. This will visualize a host on an individual background, and provide optical and acoustic warnings when the monitored host is not OK.

To create the map open the options via Options > Manage Maps. Here in Create Map give the map the name mymap and the alias My Map. For the Map Type select Regular map and confirm with the Create button.

nagvis2 regularmap create

Next import an image of the rack being monitored as the background. This is achieved using Options > Manage Backgrounds. Select the local file and confirm with the Upload button.

nagvis2 regularmap upload background

Now the imported image must be defined as the background for the current map. Call up the map options with Edit Map > Map Options and go to the Appearance tab. Here activate the map_image option and select the desired image from the menu. Do not save that right now – a setting from the maps options is still needed.

nagvis2 regularmap background

Go to the Obj. Defaults tab. Here you can activate the label_show option. This option enables the host and service icons on the map to be labeled with their appropriate host/service names – otherwise the icons will only be identified via their tooltips. Finally, save these settings.

nagvis2 regularmap show label

Now it is time to add the host. Click on Edit Map > Add Icon > host and then with the cursor (which now appears as a cross) at the position on the map where the icon is to be placed — at this point the Create Object-dialog will open. In the General tab simply select the desired host from the drop-down menu in host_name and save. If you operate multiple Checkmk sites, an alternative data source can be used via backend_id.

nagvis2 regularmap host create

The icon is now positioned on the map, and it provides detailed information via a tooltip. Clicking on the icon takes you directly to the host in Checkmk — all of the objects positioned in NagVis are links to your Checkmk objects.

nagvis2 regularmap host hover

The edit mode needs to be activated to be able to move or edit an icon. Right-click on the icon to open its context menu, and select Unlock.

nagvis2 regularmap icon menu locked

Now you can move the icon, or again open the context menu. Here a number of new options will be seen which will enable the object to be cloned, deleted or edited, or to acknowledge a problem directly from here by choosing the Acknowledge option.

nagvis2 regularmap icon menu unlocked

Once the editing of a host/icon is complete, again open its context menu and select Lock. By the way, with Edit Map > Lock/Unlock all the editing mode can also be activated and deactivated for the complete map.

You can now add further hosts to the map. Adding services, host groups and service groups functions in a similar way.

To round things off, the map can be so configured that when loading, problems will be signaled by a warning sound and blinking host icons. For this, call up Edit Map > Map Options and switch to the Events tab. Here, at the top of the display, activate event_on_load, and at the bottom check the event_sound box to receive audible warnings.

nagvis2 regularmap events

3.4. Creating a geographical map

Geographical maps are available in two different forms: The interactive variant can be scrolled and zoomed in the way we know from Google Maps & Co., and is set automatically as background. Objects that have been placed on such maps will appear on every subsequent map of the same type. NagVis assumes that an object will always be found at a specific location regardless of the scale of the map. So for example, a host located in Hamburg will appear on a world map as well as on a map of Germany and of course on a map of Hamburg.

NagVis ultimately views the various map sections and zoom levels only as viewports. At any time viewports can be saved as a separate, new map. Since viewports/maps can likewise be displayed as icons on maps, to some extent maps can be nested. So for example, a map of Germany with its dependencies can be called-up, and then with a click a more detailed view of a state, and then as needed maps for a specific subsidiary, server room, and from there even to a map for an individual switch.

In contrast to manual navigation, using an interactive map is quicker and more convenient, and as well the individual maps are active so that for example, they can be displayed in parallel on separate monitors, or set for automatic rotation on a single monitor (more on this later). Also important: in this way a summary of the related maps is thus available as a tooltip. This also makes using them more intuitive for third parties since they do not have to click through hierarchies, or need to know where zooming is necessary.

The non-interactive geographical maps must be fed with a CSV file containing the hosts and coordinates to be rendered. There are no general pre-existing elements in this case.

In the Nagvis documentation the interactive geographical maps are called worldmaps, and the non-interactive variants are called geomaps. Worldmaps were first added to the version 1.9 of NagVis.

Example: create an interactive map for all of Germany, and to this link a new viewport for North Rhine-Westphalia (NRW). Create an interactive geographical map – a worldmap – with Options > Manage Maps > Create Map. As Map Type select the Geographical Map (interactive) option – the ID (mygeomap) and Alias (My Geographical Map) can also be defined here.

nagvis2 geomap create

Specify the map section which is desired as the overview, and save this view using Edit Map > Viewport > Save view.

nagvis2 geomap save view

Next zoom into the map until the desired detail for North Rhine-Westphalia is reached. This time save the view with Map > Viewport > Save as new map as the new map mygeomap_nrw.

nagvis2 geomap save viewport

The map’s alias will be adopted from the original map, so that you now have two maps named My Geographical Map in the navigation bar on the left. Therefore now define a new alias My Geographical Map NRW with Edit Map > Map Options.

nagvis2 geomap vieport alias

Switch to the Germany map My Geographical Map and add the link to the North Rhine-Westphalia map with Edit Map > Add Icon > Map. In the subsequent Create Object dialog you only need to select the mygeomap_nrw map from the map_name menu.

nagvis2 geomap map icon create

Afterwards a click on the new icon in the Germany map takes you directly to the North Rhine-Westphalia map. In the same way additional maps can be linked together, and of course a navigation from the North Rhine-Westphalia map back to the Germany map can also be built-in.

nagvis2 geomap map link

The actual loading of the map contents also corresponds with the procedure for the other map types. But remember – all objects that you add to one of the worldmaps will also appear on every other worldmap since they are really only alternative views of the real geographic situation.

3.5. Creating a dynamic map

Dynamic maps differ from the regular maps – as mentioned earlier – in the method of adding their elements. Instead of manual additions the dynamic maps receive their elements – hosts, services, host groups and service groups - dynamically via Livestatus filters. As an example, a map should automatically receive the CPU load services from all hosts.

To create such a map, again begin with Options > Manage Maps > Create Map, and allocate an ID (mydynamicmap) and alias (My Dynamic Map).

nagvis2 dynmap create

Next open the map options with Edit Map > Map Options and select the Dynmap tab. Here activate the dynmap_object_types option and choose the services as the object type.

The interesting part now follows with the second option dynmap_object_filter, with which the filter for the services is defined. Use the simple Livestatus query Filter: description ~ CPU load\n. With this the string CPU load will be searched for in the description column. This \n does not belong to the filter itself, rather it generates a line-break required by the Livestatus query constructed by the filter.

nagvis2 dynmap options filter

If you now save, all of your monitoring’s CPU load services will land on the map. As well, any new objects in the monitoring which match the filter will be added automatically to the map.

nagvis2 dynmap auto icons

In the NagVis documentation it is also described how the configuration functions directly by using the configuration files.

By the way: since dynamic maps can also be saved as static maps with Actions > Export to static map, this method can be used as a beginner’s help to create static maps containing very many elements.

4. Customizing maps

4.1. Lines

NagVis provides various types of lines: there are purely decorative lines without further functions under Edit Map > Add Special > Stateless Line, lines which visualize hosts and services with 'traffic light colors' in the same way as for icons, and the weathermap lines. These last visualize network bandwidths using seven distinct colors. To create a weathermap line proceed as follows:

Start with Edit Map > Add Line > Service and select a host and a network interface in the Create Object dialog.

nagvis2 lines create

Next, switch to the Appearance tab and set the view_type to line. As line_type activate the --%+BW-><-%+BW-- entry. With this lines will be generated for upload and download and they will include labels for percentage (%) and absolute (BW) bandwidth.

nagvis2 lines line type

Once saved the lines will appear on the map. Clicking on the 'lock' icon in the middle allows the end points as well as the middle point of the line to be moved.

nagvis2 lines weatherlines

NagVis also provides a default legend: using Edit Map > Add Special > Shape insert a so-called shape – simply an image in NagVis. In the icon option choose the image demo_traffic_load_legend.png from the drop-down menu.

nagvis2 lines weatherlines result

4.2. Gadgets

Gadgets, like lines and icons are aids to visualization on a map. They show performance data in the form of speedometers, thermometers or similar. Consequently these are only available for services. As an example, the load on a network interface can be created in the style of a speedometer:

Add a service as an icon to your map using Edit Map > Add Icon > Service. In the General tab choose a host and a suitable network interface as the service.

Switch to the Appearance tab and set view_type to gadget. Directly below, activate gadget_url. Here there are a number of display variations which correspond to the files in ~/share/nagvis/htdocs/userfiles/gadgets/. Select std_speedometer.php for the speedometer display.

nagvis2 gadget speedometer

4.3. Container/iframes

An interesting possibility for showing external information is provided by containers. Here you can simply specify a URL and allow the target to be displayed in an iframe. As an example, a host group view restricted purely to the table should serve as an embedded view.

Add a container to your map using Edit Map > Add Special > Container. In contrast to host and service icons, here you can not simply click on the map, rather you must draw a frame. This can of course be modified at any later time. A dialog with options will again open.

In the General tab set the view_type to iframe. The actual work is in the url option: The base URL can be gotten with button frameurl on the page of the host group view. The options for the embedded view must then be added with which only the table is actually displayed (plus a bit of background). Thus the URL can look something like this:

/mysite/check_mk/view.py?view_name=hostgroups&display_options=tbdezocf

The exact fitting and positioning of the container is also done in the General tab by entering the coordinates as well as the height and width. If you want to open the context menu of an iframe container, you must place the mouse cursor directly over the edge so that it changes its shape for scaling.

nagvis modify container

4.4. Making maps rotate

On NagVis' overview page you may have noticed the Rotations entry at the lower left of the navigation bar, or respectively the list of maps under Rotation Pools in the center. Maps can be set to rotate automatically at any desired interval, which for example is practical for publicly-visible information monitors.

You can configure this in the NagVis configuration file ~/etc/nagvis/nagvis.ini.php. Open this file and scroll to line 448, where you will find the Rotation pool definitions.

Here three lines are required to define a rotation pool, the appropriate maps, and the interval — in the below example the pool myrotation with the maps mymap1, mymap2 and mymap3, and with an interval of 30 seconds:

~/etc/nagvis/nagvis.ini.php
[rotation_myrotation]
maps="mymap1,mymap2,mymap3"
interval=30
On this page