Check manual page of emc_vplex_volumes

EMC VPLEX: Volume Diskstat
Distribution official part of Check_MK
License GPLv2
Supported Agents SNMP
This check measures the throughput of the EMC VPLEX volumes. You can either have a single check for every single volume or a summary check (which is the default) summing up the throughput of all volumes.

The check also gives info on the IO Operations per seconds.

You can apply separate warning and critical levels for the read and write throughput. Optionally you can have the check compute average values on a configurable time period and have the levels applied on the average instead of the current values. This makes it possible to ignore short "peaks" and only trigger and longer phases of high disk activity.

Note: It seems that the relevant SNMP data of the EMC VPLEX System is only updated every 90 seconds. You should set the monitoring interval to 120 seconds, otherwise there will be errors in the calucation of the rates for read/write throughput and IOs.


Either {"SUMMARY"} for a summarized check of all disks or the name of the disk device, e.g. {"VPZ-B-S-L323_vol"}.


One service is created for all directors if the configuration is set to {["summary"]} (default). If the configuration is set to {["physical"]} one service is created for each director. You can also set {["summary", "physical"]} to create both variants. The configuration is set via the {diskstat_inventory} rule.