Check manual page of cmciii_can_current

Rittal CMC-III PU: Canbus and Current

Included in	All Checkmk editions
Source Code License	Open Source
Supported Agents	SNMP

This check monitors the state and current of the canbus ports of the Rittal CMC-III PU unit. No limits are set in the check, since limits are configured in the Rittal device itself. The state given by the Rittal device is taken as the state of the check as follows: If the Rittal device returns OK, the check is OK. Otherwise the check is CRIT.

Firmware versions using the MIB of firmware V3.15.20 are supported.

Item

The unit number and the internal name of the canbus port

Discovery

One service is created for each canbus port.