Check-Manual von ucs_c_rack_server_util_mem

UCS C-Series Rack Server: Memory Utilization

Distribution	Official part of Checkmk
Lizenz	GPLv2
Unterstützte Agenten	Agent_Ucs_Bladecenter

This check provides information about the memory utilization of an UCS C-Series Rack Servers racks. The memory utilization has percent as unit. The metric is based on the aggregation of all RMCs (Resource Monitoring Counters) which is a measure of memory traffic occuring at each memory channel and memory controller instance of a servers rack units.

This check supports the following C-Series Rack Server models providing XML API 2.0 [Cisco UCS Rack-Mount Servers Cisco IMC XML API 2.0]:

- Cisco UCS C220 M5 Rack Server

- Cisco UCS C240 M5 Rack Server

- Cisco UCS C480 M5 Rack Server

- Cisco UCS C480 ML M5 Rack Server

- Cisco UCS C220 M4 Rack Server

- Cisco UCS C240 M4 Rack Server

- Cisco UCS C460 M4 Rack Server

This check does not support the C-Series Rack Server model "Cisco UCS C125 M5 Rack Server Node" which is used as part of a "Cisco UCS C4200 Series Rack Server Chassis".

Check status:

- OK in case the monitored memory utilization is within the configured valid range.

- WARN in case the monitored memory utilization is equal or higher than the configured warn level.

- CRIT in case the monitored memory utilization is equel or higher than the configured crit level.

The default value for the warn level is 90.0%. The default value for the crit level is 95.0%. The warn and crit level are configurable via WATO rule Device Component Memory Utilization.

Item

{{Rack unit}} followed by the index of the rack

Discovery

One service is created for each server rack included in the agent plug-in output.